- Stock: 100
- Model: EBC-A40L
Important Notice
Note: This link is for sending inquiries only. We'll provide a complete quotation, including DDP sea shipping costs, within 24 hours.
For any online orders paid via DDP sea shipping, we'll double-check and inform you if any extra DDP shipping costs are required. We apologize for any inconvenience caused by the platform's inability to accurately determine DDP shipping costs, as shipping costs vary between countries.
How to Use the EBC-A40L Battery Tester
1. The first line shows mode (CC-constant current), voltage, and current.
2. The second line shows working process, working time (in minutes), and capacity (automatic switch between 0000mAh and 00.00Ah).
3. Working process reads OFF when the test stops and DSC or CHG during testing.
4. It shows AT1 if you choose automatic charging/discharging, and 1 means step 1 of current testing.
5. A short press on the “SET” button changes the display to power and energy.
6. In auto test of “charge-discharge-charge,” you can check test results of each step by spinning the “SET” knob.
7. Press the “ON” button to start the discharging test (shows DSC) and press again to stop (shows OFF).
8. You can open the setting interface by pressing the “SET” button for 2 seconds in the stop state. (This function is invalid when the tester is connected to PC software.)
EBC-A40L Specifications
| Specification | Details |
|---|---|
| Model | EBC-A40L |
| Discharge Mode | CC (Constant Current) / CP (Constant Power) |
| Discharge Termination | Time / Voltage below set limit / Manual |
| Discharge Power | Maximum 200W |
| Charge Mode | CV (Constant Current, Constant Voltage) |
